Using Zephyr#
Developing directly in Zephyr will not be ultimately required for end-users who won’t touch the firmware running on BeagleConnect™ Freedom and will instead use the BeagleConnect™ Greybus functionality, but is important for early adopters as well as people looking to extend the functionality of the open source design. If you are one of those people, this is a good place to get started.
Equipment to begin development#
There are many options, but using BeaglePlay gives a reasonable common environment. Please adjust as you see fit.
Required#
BeaglePlay with provided antennas
BeagleConnect Freedom with provided USB cable
2x 5V/3A USB power adapters
USB Type-C cable for use with BeaglePlay
Recommended#
Ethernet cable and Internet connection
Install the SDK on BeaglePlay#
See Setup Zephyr development on BeaglePlay.
Todo
note the tested version of software for BeaglePlay
Todo
describe how to know it is working
Change default board#
The instructions linked above setup the environment for targeting BeaglePlay’s on CC1352. We need to change it to target BeagleConnec Freedom.
echo "export BOARD=beagleconnect_freedom" >> $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate source $HOME/zephyr-beagle-cc1352-sdk/zephyr-beagle-cc1352-env/bin/activate
Try demo applications#
Now you can build various Zephyr applications
Build and flash Blinky#
Make sure your BeagleConnect Freedom is connected to your BeaglePlay via the USB cable provided.
cd $ZEPHYR_BASE west build zephyr/samples/basic/blinky west flash
Debug applications over the serial terminal#
Note
#TODO#